I am not familiar with the Victron systems. However, I am aware that with the EG$ inverters you can set the "charge to" and the "start to charge" lev...

@ron My understanding is: Data history is the data that is streamed to web monitor. In case your inverter loses connectivity to the web, it starts wr...

I would suggest you run the number through the EG4 string calculator at: SolarPanelApp It will tell you if your proposed array works and how i...

@CaesarV You might check out the following doc: EG4-Dongle-Recovery-Guide.pdf or: EG4-Wifi-Dongle-Troubleshooting-Guide.pdf Thanks, JB

I had the same issue when I first set mine up. then after a day or so it started to work as expected. One thing I did notice was that the three "Sol...

@thomacus If the calculations show that it will run on a single MPPT, you can definitely run just one MPPT and then add later on the other MPPT. I ha...

@johnnyg Just as a follow-up, I THINK it is setting 6 JB

Maybe one of the EG4 technical experts can help out on this. I am just not certain which settings are on the screen to increase the Adc charge rates,...

@johnnyg There are some settings that will increase the charge limits to the battery. I am not certain if they are available on the screen or the pho...

Keep us posted please. JB

That is nice. I would give it 2 thumbs up if I could. {emojis}:star-struck:

@johnnyg fault 18 appears to AC frequency out of range. I am guessing that the gen was cold as well? This is just a guess but, if you allowed t...

@johnnyg Do you know what the fault code was? Also, have you tried power cycling the entire system? Batteries and inverter. JB

@daddydoug33 Interesting. I do not understand why Setting 19 would have affected that. Have you set up the web monitor? There is a little more deta...