All up to you. No switching with the CV as it charges the batteries directly while the inverter powers the loads. Rectifiers can be purchased in any s...

@dougl I totally understand! Although I can't promise anything, I can definitely let them know.

That battery is pretty much completely depleted. You can try charging it with a 48V charger at a very low amperage. We do offer a 48V chargerverter th...

@darcymyers This issue has been resolved, let me know if you continue to have issues with this.

@ron I agree that the chargeverter would fix the issue. I highly doubt that the reason they sell it is because the inverters they advertise as "gene...

Maybe my thinking is incorrect and let me know, but these inverters are actually UPS's and can either inverter (DC to AC) or convert (AC to DC), but n...

@eric It is reading 43.5V, it turns on for about 20 seconds then turns off.

@eric Any update Eric? Or should we accept that these inverters should not be used with generators of any kind?

@eric thank you. It's an important feature for anyone wanting to use the inverters for NEM3 based export since the utilities are making it difficult t...

The best way to charge the EG4 battery would be through voltage. SOC would not be a factor in your case since there is no communication. As far as I k...

Some settings do require for the inverter to be on standby. You can try putting the inverter on standby through the settings and then try to change th...

You can always give us a call at 903-609-1988 or email us at [email protected] voltage is the battery reading?

I can submit a request to our team for this change. Thank you for your feedback and insight!

I haven't used this, but it uses ESPHome firmware on a 20 dollar board and will pipe data straight into Home Assistant.