My topic, which you're replying to, isn't about that.Maybe you should post a new topic in general troubleshooting <-- That's a link. If you're in...

Reboot the wifi router.

@eric Signature Solar support changed it yesterday to Lead Acid.

BwSMk00UoUk4kWoqQpUAzmist

Response from EG4, similar to Signature Solar Tech Support: "The low voltage you’re seeing on the PV inputs is due to the PV and batteries sharing the...

@eric thank you for the response. I believe there's a capacitor that gradually charges up to and discharges the 17-18 VDC when the inverter is turned ...

@hanzi The low voltage you’re seeing on the PV inputs is due to the PV and batteries sharing the same DC bus. As a result, there will be very little v...

@talk2dang Is the router close to the dongle?

Which firmware version are you running on the 18kPV and What do you have the Lithium type/brand set to?

I looked through the schematic in the owner's manual and I am guessing that it could be done with using a meter and some testing of the wiring. It a...

@george-redinger Regarding Chinese access to EG4 data, I do think we need clarity from EG4. This topic probably deserves it's own thread. Cc @j...