Hi Eric, Thank you for the lead. I just sent over an email. I'll report back here any updates.

The reason it’s not stopping the discharge is that the system is configured to use the battery before the grid. To change this, you can enable- Batter...

@joel-brodeur Hey, I know this post was a while ago, what app is that? the stock one, Solar Aircon, doesn't really say much. I got my solar mini spl...

@diver-dave EG4 batteries are capable of communicating with other inverters, which is probably why that question was asked. I don’t recall the specifi...

Hello Eric, The first 2 screen shots show the Forced Discharge being contained be the AC Charge times. The second 2 screen shots show that Forced ...

I would not connect them in series for a 48v system, I would look for an inverter that can work as 24VDC, either single phase or split phase, whiche...

@eric, since the beginning of this forum, you have been the most helpful source of information about EG4 batteries. I bought a 3-rack and batteries ...

@chris07x Set "Grid Sell back Power (kW)" to 0.0 — if allowed. Go into advanced/inverter/installer settings and look for “Zero Export” or “...

Thanks for that info Eric!

Those settings look correct. Are you able to share screenshots of the old setting pages so I can look at all the settings? Or you can also share your ...

Thanks for this feature. Nice addition.

Can you share a picture of the Dongle Connect Params? I can send you a replacement if need. I just want to confirm that the issue is with the dongle.

If you have the settings correct, it should use batteries. Make sure you have Power Backup-Enabled and make sure that Battery Backup mode is disabled.

Any documentation that we have on this battery is on our website. If you don't find the correct document that you need, you can reach our compliance t...

Note for safety you can disable remote updates, and only enable it as needed.