Thought I’d post a short video of the brownout that I’m still fighting.

@brokenpointjoe it should have worked at those low amps. And FYI on the 18k screen on the generator charge it says Amps but it’s Amps dc. I had my ...

@ron My generator like most does produce dirty power. I use Line and Load reactors on 30-40 VFD’s here the farm. I’ve been thinking about putting ...

You cannot share an array between multiple inverters/mppts. They will end up fighting with each other trying to find the maximum power point. You ca...

You cannot use the Cerbo GX to monitor the 18kPV. Without battery communication to the inverter, everything will have to be based on voltage.

The gridboss is not an inverter, it's basically an interconnection device between inverters, the grid and loads. You should be able to AC Couple t...

The panels are rooftop and the inverter is on an exterior wall on my house in MA.

@jwmarshall Yikes! Can we tell if they are Made in America or Made in China through the connector compartment door?

@jlankford, yes that is Exactly what I am saying. Whether or not they are saying it, I am saying that my system was working before I uploaded the 1E1E...

Warning 27 indicates either a low battery voltage or a communication issue between the battery and inverter, preventing the inverter from receiving th...

What is the voltage on the battery that is going into protection mode?

Turn the main grid AC breaker off.

There is no setting for this. If grid is present, the inverter will not use the generator.

It can work both ways, it depends on how you want it set up. This depends on the panels you are going to use. Some panels produce more voltage than ...

Thank you both for chiming in. So the Label "Consumption Power" is the total power consumed by my home + the inverter inefficiency. This would make s...