@jarrett Sounds great sir. I really appreciate you checking into this. I have been on the hunt for a 32 NO switch for a couple weeks so far. The...

When creating an account for your customer, ensure that your installer code is entered correctly. After this step, and once the customer is linked...

My apologies Joel, I could not find an RSD that would work this way. I took some time to look yesterday and didn't find a 2-pole NO RSD button. I am s...

This is correct.

@bobandroslyn I recommend adding an external bus after installing three Wallmount batteries to a single inverter.

So here is a screenshot of my Inverter Sol Ark 15K Closed Loop stating 10% SOC = 50.6V. Is this the true 10% SOC at this voltage? I don't know. Does E...

Thank you, @jared. It would be good to know where I'd run into future expansion issues. If I expand from one to two wallmount batteries (next year) ...

I did switch to close loop and trying to figure out the details. For the EG4 Wall Pro spec sheet, what voltage (V) for a 10%, 0% state of charge? ...

Thanks Jared. So this is essentially a duplicate of the "Power Backup" option on the Maintenance tab under Application Setting? If so, I'm glad I di...

Hi Jarrett, Then what should the Float be? The spec see says charger setting for float is 54V+/- 0.2. So 54-0.2 =53.8V Sorry what is 80% DOD?...

Having the Float that low is good for Lead Acid settings, but I would recommend Closed-Loop since they are Lithium batteries. I also know how SolArk g...

You are SO SO welcome! We're happy to help as much as we possibly can! We appreciate your support very much! Reach out any time!

@pawnee Thank you for the shoutout!!

I'm so glad we could help!! Thank you for the feedback!