Ensure that Battery Backup Mode is disabled, verify that you have sufficient solar and battery capacity to support your loads, and set the On-Grid Cut...

The GridBoss cannot operate without an inverter. For AC coupling to function, both the inverter and batteries must be connected to the GridBoss.

Yesterday night (6/18) we had some big storms roll through Ohio and our grid power went out a few times during the course of the storm. At least 3 tim...

I don’t have any updates at this time. Currently, the only way to use AC Coupling is through the Gridboss. If there are any changes or updates in the ...

I recommend inspecting the PV cables to ensure they are properly connected and that none are damaged.

The WallMount batteries have internal bus bars and are designed to be connected to each other as shown in the diagram. This configuration helps keep t...

Microgrid is enabled. But the only action in the app that changes the contacts state is the “ generator exercise “ button. What other parameters are a...

I don’t have that information at the moment, but once the firmware is released, we’ll provide a changelog detailing all updates and fixes included.

We are Currently working on fixing this bug! I apologize for the inconvenience!

@srafter2 NO1 and NC1 will work with a generator only when the Micro Grid setting enabled.

@pawnee thanks for the heads up on this thread. I'm basically at the point of giving up as well. Though I refuse to throw $1200+ at two chargeverters ...

@pawnee Let us know what you find comparable to the chargeverter.

@jk490 I just posted on another thread that I have given up. Buy a chargverter and it will solve your problems.

@srafter2 I m giving up and buying a chargverter. I hate to say it but I’ll find a different manufacturer for it. Not trying to create waves with the ...