Any updates from the team on getting AC couple mode working again on 18kPV when a GridBoss exists? Again, In my case, I'm not trying to use the AC c...

Found that Weather Optimizer was enabling AC Charge mode. Note that when enabled by Weather Optimizer settings, it never gets disabled by it, even if ...

I have 14 400W panels with a VOC of 37.07. It should be one string of 9 and one string of 5, per the plans. VpV on string 1 is peaking at around 260...

UPDATE 😕 After 24 hrs of smooth operation with lithium type 1 battery setting the inverter resumed periodic power losses when in off-grid mo...

The Ceiling goes up! That should help the A/C be a "bit" more efficient. Insulation is next.

UPDATE. For some reason the COM1 NO1 and COM2 NO2 dry contacts started working today as per 5.8.2 of the Manual. (Maybe the overnight system resta...

@eg4eric Touch the wood - all works back as it supposed to. Thanks Again for the tip of cycling the Wall mount battery in lead acid mode and ...

I can definitely submit a request to our team for this.

Hallo Eric, Thanks for reply. Actually I wanted to use dry port to trigger the external relay switch based on the SoC of the battery. Is there any...

@eg4eric Thanks a bunch! I will try this out.

Do you have Solar panels with your system?1E is a part of a different firmware, so you have 2 different firmwares installed. To have the correct firmw...

1) You can set the System Charge SOC Limit(%) to 80%, but then will not allow the batteries to charge to 100% at all. It will always charge to 80% (Th...

There is not. Do you know how many you installed and VOC of the panels?How many volts are you getting as of now per string?