@yachtdr22 I apologize for confusion, I didn't notice that you had a Sol-Ark system. This would only work with an EG4 system.

@eric YES PLEASE... I would be delighted to give this a try? Which Monitoring Website are you referring to?

@yachtdr22 You should be able to view all Lifepower-V2 batteries by setting the first V2 battery as the master and assigning different IDs to the rest...

I went ahead and removed the old dongle from your account. Please let me know if there is anything else I can do for you.

@erickhj How do you have the batteries connected to the inverter?

I did some troubleshooting with an oscilloscope and have some interesting results. Here is a summarized test matrix and results: Run from wall (...

I actually use this website: the xxxx's are my personal info redacted... you can set up your entire system and have it preditct how much for to...

in float its providing 54 volts to the batteries and 3 of them are not responding. When the one battery discharges to charge back up its set for 56.2

@eric Need to clear my EG4 monitoring account of the old dongle. New dongle pops up on my iPhone just fine.

@eric Yes, all to the eg4 settings, as well as my mppt charger. Currently it says its in float while one battery is at 100% while the others are at ar...

@eric That didn't work, but I received support from Signature Solar and was able to get this battery connected to my 6kXP. My battery is a V1 LL. Than...

@eric Yes, but only 1 v2 battery at a time. I need to monitor all of all of them.If there is a battery with a problem there is no way for me to know...

Woah! The latest firmware (released today!) Seems possibly to have fixed the problem!Not a single EPS overload today!