Strangely enough, the "BMS Event" Column shows 0x6659 which is 26201 in decimal, the same as all those other corrupt fields.I don't even know what "BM...

I'm seeing this again... notice that the max charge / discharge amps are always being sent as 90A. It appears like the inverter gets one bad packet (f...

Followed instructions just now and previously, same result, the dongle doesn't pop up in mobile device (iPhone 15) Wi-Fi. The Wi-Fi light on the dongl...

@joel-brodeur Thank you Joel for that amazing summary! This makes sense and will help direct the expansion of my system. 😊

@whiskyneat305 with wind the challenge is defining a wind curve. As the wind blows, the turbine spins generating volts. The faster the spinning the ...

@eric appreciate the help Eric we’re trying to hunt down a Windows laptop. Since all we have is Apple equipment before we can do it we did receive the...

Hold the reset button located under the dongle for about 3-5 seconds. Make sure you are connecting to a 2.4GHz band. Make sure you follow the instruct...

@coolcat I've attached a document for the Flexboss and Indoor WallMount battery. Let me know if this isn't what you are looking for. EG4-FlexBOSS21-28...

For user-defined, it really depends on your battery's recommended configurations. Normally for EG4 batteries, the settings would be: #26 (Bulk char...

@eg4c I would need to review additional data, as it's difficult to analyze based on a single recorded instance from the inverter.

@jp86gt There is not one for the WallMount batteries. If you need assistance with the firmware updating process, I'd be more than happy to help.

@whiskyneat305 The inverter's MPPTs are engineered solely for solar applications and are not compatible with wind energy. Under no circumstances shoul...

@haitises Unfortunately, we are currently unable to send out the BMS, as our compliance and legal team is still working on the necessary documentation...