New to EG4 - full DIY install completed a couple weeks ago. 6000xp- (2) 48v Lifepower 4 100wh batteries along with 3950w of solar panels. Initial ...

@caesarv @jared Thank you again Caeser. This was the most helpful note of all. My understanding is that the 12kPV should perform the same as the 18k...

@jared Can I DM you my station ID ? my update was problematic during install .

BTW, I don't have the wallmount batteries. I have an 18Kpv and six LL-S rack batteries. I've read here that both the LL-S and the wallmount should be ...

@weertske The CAN port is what I'm using. The RS485 connection didn't work for me. Maybe post some photos of each battery in the morning, cable conn...

I am using the battery CAN port to communicate to the 18KPV. Should I be using the RS485 port? That seems to be what they are using here.

Thank you. I will try that out in the morning. The second and third batteries have their DIP switches set to 2 (binary 01) and 3 (binary 11) and they ...

@weertske On the inverter, the battery brand should be set to 1 for the wallmount, not 0. You have battery comm cables connecting the second and t...

Twice my dongle has failed to connect and twice I thought it was the dongle. Turns out both times it was a modem/router issue. Once it was my DSL ...

@jared I also have Z02T03. I am having an issue with CANbus. I will not hijack this thread but will watch and learn. Thanks.

@ron Yeah, it's rare our batteries get below 50% and typically don't go below 60%. I was confused about the top, thinking I should stop charging at 8...

Seems strange for a washing machine. What is the wattage at when turning it on?

Merry Christmas!