My experience is that a lower depth of discharge increases battery life ie. 30-40% SOC, but everyone has differing opinions.

@dtbaker61 that's cool that it's working well for you! I keep ours on the lithium setting because then the app shows percentages. The percentages ar...

these settings are working pretty well with 6000xp firmware v 190D0E. Most days I see a correct battery voltage cc-cv curve with end-of-charge at 56.2...

@jpangburn Thanks - that is a good plan and I will give it a try turning off one battery at a time and see if that will clear the fault. Pace bms are...

This is a pic this morning with all inputs. (No grid input)

@frugal-farmer picture taken at night, so no solar input and I am not connected to the grid, the inverter was powering an outlet with my mini- split a...

What if any inputs are active at the moment shown in the picture that are not showing active? Also, is/was your inverter in "stand-by mode" when the p...

@ouijifour I don't know what Pace or Pylon is, sorry. I have the LifePower4 batteries. On those, there are two types of reset (maybe yours are simil...

@jpangburn My Pace bms that have 5 batteries communicating with each other , the bms reports the average of all of the batteries to the EG4 6000xp . I...

Happy holidays to everyone at EG4. Keep up the great work and looking forward to the new innovations next year. 🙂

@jared Just checking in to see if you have gotten any update on the firmware version(s) on my batteries and if there is anything I should do? Th...

This is the screen