Did you ever get to the bottom of this? I made a post about have related (but not identical symptoms). My inverter would go into bypass mode when load...

Wow. Can you point to some specific capacitors that can handle that?

@twistedroutes no grid and Android? You’re missing out on 2 of the greatest things today…. lol I think that firmware wasn’t just hanging up o...

I can only hope that:1. This firmware update will be added to Android for the 12000XP (Still not there at time of writing)2. This firmware doesn't exp...

Mine too! I have a 10kw Generac, the charge power needs to be set to 3kw in order to have a smooth switch from battery to generator. The inverter nee...

@wardo5757 Do you mean an adjustable warmup time? That would be VERY nice as well. My generator would be much happier. 🙂

thank you Eric! You didn’t mention the initial switch to generator, will this be included in the update?

Can you post some pictures of the system and maybe how it's wired as well? I don't see anything indicating the power going out.I recommend deep cyclin...

@eric Thanks for responding, but it's not that helpful. I understand the settings (read the docs many times) and I've set the discharge current limit ...

For this, make sure that the Discharge current is set to 250. Also, try to keep both Leg 1 and Leg 2 as balanced as possible to prevent any overload i...

Does your laptop recognize the port? If it does, try to continue the update.

@scottmr808 Once you get the BMS tools going, we will be able to see what is causing this alarm. So, you are getting 51.4V on the battery?