@joel-brodeur yes they used to be displayed on the old version as 2500 or what ever was being pulled. Now the say 2.5 Kw so that’s fine by me. Bett...

@eric 9 Life power V2’s 900 amp hours. 8000 PV watts

The system is set up by a certified electrician with all of the safety precautions in mind. I thought I did turn the ac in breaker off. I can try th...

@eric - As background, I received and installed the all-in-one inverter and LiFePower4 battery yesterday afternoon. The solar panels were connected to...

As a safety note: when you have a power outage always be sure to turn off the Main breaker in the panel. The way this is set up you could easily sen...

Okay, so I think I know why your lights "flickered" during the outage. The inverter was supplying power to the breaker panel which if the "grid" bre...

It is a 30amp inlet receptacle for a 30amp generator cord.

@mylesj Cool, Thank you. What is the outside transfer switch connected to? Is it for a gen or is connected to your service entrance?

Hello, Included a main panel image showing wires to the 50amp transfer switch breaker. And there is another 30amp transfer switch located outside, t...

@mylesj Could you grab another pic of the upper portion of the Main Panel to show were the transfer switch cables run? Also a Pic of the inside of t...

Hello Eric, thank you! I had a certified electrician install an am assuming it was properly wired. I took a pic of the inverter wires and the main pa...

Do you have Cat5e cable or higher with pins 7 & 8 only?Make sure the LL-S batteries are on top, meaning the LL-S battery is the master battery tha...

@zeppelin If you'd like, I can separate the inverters to give you the view you're requesting. They will no longer appear in parallel on the monitoring...

It’s probably due to residual energy. Have you tried turning it on or leaving it on to see if the energy drains out?Also, If the PV is connected, it w...

@zeppelin Make sure that notifications for this app are enabled in your phone settings.