Today I unplugged the dongle, reconfigured it to work on my DSL line instead of my Xfinity line, and now it is working again. I am not sure if it was...

The new firmware (FAAB-CC1E or FAAB-1E1E, plus the LCD v18) seem to have much worse performace compared to the previous I have been using for the last...

@JB The inverter is a Victron Multiplus II, 48V, 3KVA unit. I'm also going to use a Cerbo GX and a GX touch 50 display In the ideal...

@dlwittsr Good to know. Thanks.

@davede Could you share the model number of the Victron inverter. If I get some time I can poke around in the manual and see what I can. In regard ...

@joel-brodeur I actually had that very thought today, we have an old 220v stove that we use outside, and a length of the wire with the same plug as th...

@wfbiggin M not m? That is weird. 50 M-Ohms seems like too much for just wire length vagaries in the meter. I am guessing that the RV has an invert...

@joel-brodeur Well it doesn't read as open when I put the meter on those terminals but the reading is quite high like 50M ohms.

CORRECTION: I mistakenly stated the Tigo site updates at 1-minute intervals. Incorrect - Tigo claims a 10 minute update with 20 minute lag (including ...

@JB Thanks for your response. I'm hoping Victron can do this. @jared Ok, looks like closed loop is definitely the way to go. Is there a doc...

So here are the details... for those of you who want to know. I have an existing solar system, which includes a chargeverter in case I ever need to c...

It sounds like you just need a DC-DC converter rather than an AC charger. Victron makes numerous models...

@ron I am guessing here but maybe trying to use it as a relatively inexpensive charge controller? I know Hydro is pretty straight forward since "in ...