@dtbaker61 I have passed all of the information along, and I am waiting for this as well. I know that they were working on everything plus the things ...

@jarrett , it's been more than a month now.... and no work back from EG4 on a firmware patch to address this bug in charge curve ?! I am not impressed...

It has been a while. Has the SOC discrepancy gotten any better after some more charge/discharge cycles? JB

I have never understood the lag when setting it up for the first time, must be some validation process between the servers or something. Glad it is ...

The input for Chargeverter only allows for VAC.

Thanks again JB. Two days later the EG4 site began showing data from Tigo on the solar panels. The EG4 view is close to tracking the 1-minute Tigo sit...

With the discharge curve of the battery, the voltage range from 52V to 50V typically corresponds to an 80% to 20% state of SOC. However, since voltage...

I am not familiar with the Victron systems. However, I am aware that with the EG$ inverters you can set the "charge to" and the "start to charge" lev...

Good point on the UL ratings, I believe CA has crazy requirements if the total BESS (enclosure + batteries) is not UL9540 certified, and in this case ...

Finished the equipment install. Now going to start experimenting with the smart load settings for controlling my two car chargers. One Tesla charger o...

This is the most recent, the oddity was that the voltage did not change.