@jared It is the indoor battery

Is this the Indoor or the Allweather battery? Also, both the RS485 and the RS232 cable would be needed for a firmware update.

From your description, the inverter is throwing an internal communication fault. Feel free to send me a DM of the serial number for the inverter and I...

Thanks Jared. Well, that is what I did. I assume this will eventually be implemented, otherwise there is no reason to even ask if DST should be en...

@papote EG4 protocol is currently the only supported option on the Chargeverter GC.

Do you have a scene created on the Solar Aircon app?

Currently, a manual adjustment is required to switch from Daylight Saving Time to Standard Time. This can be done by navigating to the Configuration t...

1. This would be possible with the paralleling kit installed on the Wallmount batteries.2. According to the Chargeverter manual, this setup is not rec...

According to the Chargeverter manual, this setup is not recommended. However, I have observed customers connecting the Chargeverter communications in ...

@jared Thinking about this, I can see how some folks would want to conserve fuel, and some would want to "top-off" batteries. When the developers lo...

Would you be able to post a screenshot of this error?

The Lifepower4 V2 must serve as the master battery due to the architecture of the BMS. This document will assist you in setting up communication betwe...