Monthly does seem a bit excessive! and the equipment might be pricy for quality stuff. I agree, there must be an easier way. The answer should ...

Email me directly and I'll give you my inverter number and you can look it over

I think my settings were wrong and I kept blowing my 60 amp battery fuse, when that happen the negative was intact and the inverter read my voltage wr...

@eric yes, only the v1 batteries, but not the v2 batteries

Currently, there is no LCD firmware update available, but we will let everyone know as soon as there is.

You can use BMS TOOLS and BMS TEST to look at the battery details and information.

Sorry I couldn't get back to you on Friday. Were you able to switch it back?

The GridBoss can support down to 30A breakers. However, I will look into this and see if you can do a 20A breaker and if so, where you could get it.

I know it's working fine now, but what batteries are you using?Also, if you have this issue again feel free to reach out to me and I will look into it...

This only happens when you use Start Quick Charge?

@joel-brodeur Thanks!!

Any luck @diyrich. I too am looking for one.