Okay. I get way more information on the desktop site. It looks like while the voltages are all very close the SOC is widely different between the batt...

Make sure you have the Discharge current set to 280A. This has to be manually changed or else the battery discharge will be set to 140A which is what ...

Eric, it switched back over off the grid. but, the issue is with the mobile app, it does not correctly set the AC charge parameters. I was able to get...

What is your inverter's serial number or station name? I can take a look at it for you. For the Batteries SOC, you can Top balance them. Charging them...

The batteries reappeared and it's at 25 percent now, but I don't know how to get it to stop using grid bypass. I have it set to only do grid bypass at...

I'm looking for the wire size the terminal can accommodate. I know the recommended is 8 AWG. And you've seen 6 AWG. But, what is the maximum size?

Hi Gang! Thanks for all your comments. I had technicians out to look at it and spoke with several eg4 reps and seems the power is too dirty, they'll i...

@somej Thank you for the pictures! I sent them over to our battery technician. I'll let you know when I get an answer from him. Should be either tomor...

@jp-ouelletteWere you able to get this going?

If the grid isn't connected to the inverter, you can connect the generator to the grid port and enable Micro-Grid mode to prevent it from feeding powe...

Batteries 7-12 are v2 4dip units. The rest are all 6dip v2, v3, or v4.