At this time, there are no plans for this. If any changes are made in the future, we will provide an update to everyone.

Thank you for sharing your feedback! I’ll make sure to forward this to our team for consideration.

@jimijo I don't have direct familiarity with SolarEdge inverters. However, if the unit is a 48V system, it's likely that it will work but there will n...

Hi - it's not every day, but has happened a couple of times now in a few months. I will set my cut-off SOCs lower (to 10%) to see if that will trigge...

Are you still experiencing those warning codes every day?If so, we recommend reaching out to your distributor for a replacement. This issue has been i...

I am looking to add eg4 PowerPro batteries to a SolarEdge inverter. Will it work?

@tomt Yes, you’ll need to disable AC Coupled. The inverter isn’t designed to switch between AC Coupling and a generator, so this transition may not be...

@notmyday Can you please send me a direct message with the following information: First and Last Name Email Phone Number Shipping Address

@woody350 Glad to hear! If you run into any other issues, please let me know!

@kwindrem The Smart ports will not receive current when using the generator unless the ports are configured for operation.

@eg4eric I have a similar situation where I'd like to connnect my existing solar array via AC. I'd also like to have the option to use a generator...

I second that. It would be great to have and be able to toggle on and off. Not sure where you would get accurate data to work well though.

I read they recommend 3/0 wire size, but that's rated for 200 amps. I went with 1/0 for 150 amps but even 1 gauge is 130 amps. You don't need more...