@dtbaker61 I am glad you have something that works for your system and how you want to manage it. Most other controllers are very flexible to work wit...

@dtbaker61 That is assuming someone wants to charge to 58v . I only charge to 55.2v which is 99% full. My balancing does not turn on until 55.2v so i...

@dtbaker61 There is no Absorb Time for the Lead Acid mode so no way to give a bms time to balance cells .

@dtbaker61 I would differ that this is off topic. With direct modbus control to home assistant , it is possible to write automation that would get c...

I have local control for monitoring my EG4 6000xp and could probably do some control too in the future. There are two ways to approach this. One is to...

@dtbaker61 well said about the problem. I regret getting the eg4 6000xp . I just assumed that it was advertised as offgrid use and has closed loop th...

@jacobranchsystems-com I have the 6000xp and was amazed when I got it, and disappointed that the battery charging does not work very well. There is no...

@dtbaker61 Have you ever watched Off Grid Garage on youtube ? He has done lots of testing and graphing and explaining the results of voltage , capaci...

@dtbaker61 My bms is programmed to reset to 100% at 55.2v . I understand what you are saying though that many bms are programmed to reset the SOC at 5...

@dtbaker61 Tomorrow I am trying lead acid 55.2 v absorb 53.6 float and 54 v for equalize 0 days and 0 time. I will see how that goes.

@dtbaker61 I see in your settings that you have Veq higher than your float ? Does this do some trick to the firmware to make it work better in lead ...

yesterday I had closed loop and for some reason it went up and down 5 times from 55.6 to 53.9 v. I decided to go back to Lead Acid settings and it did...

I wouldn't have gotten the eg4 6000XP had I known it was so wonky with charging lithium batteries. Hopefully a firmware update fixes this.

@jpangburn Thanks - that is a good plan and I will give it a try turning off one battery at a time and see if that will clear the fault. Pace bms are...

@jpangburn My Pace bms that have 5 batteries communicating with each other , the bms reports the average of all of the batteries to the EG4 6000xp . I...