@eg4eric Thank you. So just to clarify, as far as loads go, the inverters will still manage things properly and pull from whichever battery (or both?)...

Thanks. I found the resources onby selecting "EG4® 8KEXP-240 ALL-IN-ONE HYBRID INVERTER - LEGACY PRODUCT" in the first drop-down selection list.

Thanks for the replay. I went with the 3 XP's for redundancy. Did not want all eggs in one basket. A little more planning and panel wiring is req...

System looks awesome. I went with 3 ea. 6000xp's also instead of a larger inverter

I will check with the distributor. Thanks for your help.

I was told yesterday to do cold restart of entire system including BMS, which I did and ... No change. The comms from Wall mount battery BMS to inve...

Interesting. A product that can make the EG4 not work to it's potential? Seems an odd selling point. I don't believe that the dongle hardware is the t...

If you connect the inverter to the third battery, it will draw power from the third battery first, then the middle battery, and finally the left batte...

We can look into this for you. Because this is a second party app, we don't have all the information regarding the app and the dongle.

It would be great if you could take a look. They are online. From what i have figured out so far I have to disable Off Grid mode after 5 pm and turn i...

The RSD will shut down the inverter. This means it will: Stop any output to the EPS Stop charging the batteries Stop charging the ba...

@eg4eric I did end up trying over the weekend... Put 2T18 on one of the LL-S units and set it to cluster master, set the com proto to Schneider, an...

@somej I would have to double check on that, but you can definitely try! Just make sure you set the LL-s as the master battery and make sure that the ...