I did switch to close loop and trying to figure out the details. For the EG4 Wall Pro spec sheet, what voltage (V) for a 10%, 0% state of charge? ...

Thanks Jared. So this is essentially a duplicate of the "Power Backup" option on the Maintenance tab under Application Setting? If so, I'm glad I di...

Hi Jarrett, Then what should the Float be? The spec see says charger setting for float is 54V+/- 0.2. So 54-0.2 =53.8V Sorry what is 80% DOD?...

Having the Float that low is good for Lead Acid settings, but I would recommend Closed-Loop since they are Lithium batteries. I also know how SolArk g...

You are SO SO welcome! We're happy to help as much as we possibly can! We appreciate your support very much! Reach out any time!

@pawnee Thank you for the shoutout!!

I'm so glad we could help!! Thank you for the feedback!

This is correct and another station will not be needed. All information will be accessible through the local connection per inverter.Not at this time.

'I'm interested in becoming a distributor if you can point to the right person to talk to.'Hi! My name is Jessica, I'm the Online Engagement Administr...

So you need to load the app from the appropriate App Store, connect to the WiFi AP created by the dongle, and then run the app? Do you need to add th...

Thanks. I made some changes and will try again today. If it still does not work, I will export the settings.FYI, I purchased this through Solar Sove...

@bluetrader222 I believe that if it is not a bad cell, then it could be a loose Battery Harness. I wouldn't think it would be a danger at the moment, ...

Would you be able to export the settings and post in thread?