Woke up this morning and can no longer read params from either of my stations which means I cannot start quick charge. The error is read params failed...

I tried to delete the above post. But everything is working now!

  Sort of, I realized it was not respecting the charge settings to 57.0 volts because BMS would disable charging at 56. This stopped chargi...

Fixed! Using the correct battery type resolved the issue I was having above with the charging not kicking on! Thanks for your patience with me. I n...

Edit: just now saw Eric's helpful comment about my incorrect lithium type. That could have a lot to do with the issues I had below.. Will try that fir...

Thanks! I will charge everything to 57 volts somehow. I think if I set the batteries to lead acid and set max voltage to 57 and do a quick charge? Nor...

Okay. I get way more information on the desktop site. It looks like while the voltages are all very close the SOC is widely different between the batt...

Eric, it switched back over off the grid. but, the issue is with the mobile app, it does not correctly set the AC charge parameters. I was able to get...

The batteries reappeared and it's at 25 percent now, but I don't know how to get it to stop using grid bypass. I have it set to only do grid bypass at...

I think i can figure this out now. I see i can add the dongles.

@eg4eric Okay it worked this time. Do i need set up the second dongle the same way to see the paralell inverter status?

I don't know what a "station" is so probably not. The furthest i have got is to do the local connect to get it on the wifi. Then i went online to regi...

Hey, it seems like the dongle (DJ43502679) cannot be registered. I posted on the forum about it, but it maybe something about this specific dongle. ...