Currently, there is no LCD firmware update available, but we will let everyone know as soon as there is.

You can use BMS TOOLS and BMS TEST to look at the battery details and information.

Sorry I couldn't get back to you on Friday. Were you able to switch it back?

The GridBoss can support down to 30A breakers. However, I will look into this and see if you can do a 20A breaker and if so, where you could get it.

I know it's working fine now, but what batteries are you using?Also, if you have this issue again feel free to reach out to me and I will look into it...

This only happens when you use Start Quick Charge?

@joel-brodeur Thanks!!

Any luck @diyrich. I too am looking for one.

turns out this was the inverter relay in a loop, if you hear it once it's not loud but every 30 seconds, it woke me up from a dead sleep, I'm not sure...

Well I now have another "issue" Dust, Dirt & Humidity. Arrrrrgggggggg Posted in the general inverters forum and nobody wanted to go down tha...

@ac130buff Yes, the SW switch is for an external RSD button. If you don't have Tigo, you can ignore the rest of the diagram.

@joel-brodeur This picture is from the manual and for a TIGO external transmitter. Are you saying hooking up to the 2 SW location with the switch wil...