Notifications
Clear all
Batteries
4
Posts
2
Users
0
Reactions
16
Views
Topic starter
I have 2 different versions.
2 X GRW ver.Z15T07 and 1 new one LFP ver. Z01T17
The most the BMS tools can do is display some of the data.
And questionable data on the new one.
So, can I get help setting parameters for each battery?
I see SOC is not stable, but the cell charges are steady. Can the SOC be set to the average cell voltage?
The new battery LFP pulses slower and refuses to take any current less than 1 amp,
while the others take it down to around .5a each.
Please help
DiverDave
Posted : April 17, 2025 6:57 am
what inverter are you using?
Posted : April 17, 2025 4:06 pm
Topic starter
I am using AmpInvt 3k Pure Sine Wave Low Frequency inverter as UPS.
The inverter works well, I also bought a 60A Solar Charge Controller by AmpInvt.
These units are programmable but not BMS-controlled.
DD
Posted : April 19, 2025 1:16 am
Topic starter
Posted : April 19, 2025 1:17 am
