As a follow up, it is now going to get difficult for me to perform further tests for a while. We have started getting sun again and my solar will typ...

Probably related to this issue. It sounds like there is a software fix, perhaps not released in an official build yet...

@eric I have never had Gen Boost enabled.

got it running.... portable power in a 63gal toolbox: 10kwhr-eg4.3k 120v AC inlet for charging from grid PV input for charging from PV AC out ...

@joel-brodeur Have you tried enabling Generator Boost?@wardo5757 Understood! I'm trying to gather as much information as possible. Thank you for being...

@eric Is the battery type something you can remotely change? This inverter is very remote ...... I thought it was 0 for EG4 on the 6000xp and 1 for 12...

@somej I did notice the two working ones were sequential serial numbers and the third was not ... they were all purchased at the same time from my loc...

@eric think all three were listed at 55% SOC which seems standard for the new batteries I have been getting, 51.4 or something?

I apologize for any confusion, but I'm glad you were able to get it connected. If you run into any issues or need further assistance, please let me kn...

{solved} turns out that the paper manual v 1.3.0 was terrible, but the online v 1.3.2 is better, and I was able to get wi-fi monitoring working. ...

the battery BMS is trying to protect itself from over voltage. your setpoints are too high. read thru your battery manual carefully to see what recomm...