My batteries are the Basengreen DIY 314aH/16.2kWh with an active 2A balancer and I originally assembled and connected 2 packs together and I ran them ...

@wicksmith1 What do you have T1 and N connect to?

I was just informed by Signature Solar that the RSD relay port 2 cannot produce 12vdc to keep the battery at the starting battery for the generator ch...

I was told by EG4 team that I had to install a 2 wire start kit on my generator since it previously was controlled by an automatic transfer switch. I...

I am working on same issue. I have a 20kw generac whole home with Evo 1 controller. This video has helped. I am close/p>

16 is at SNU. Thanks but checked that already. Guess I will call Signature Solar soon. If they can fix these with software I will report back here wha...

I am seeing activity through the web site (monitor.eg4electronics.com), but still no data within the App (ios).

@95g-atl I don't think the battery charger is bad. 43.8 V is exactly what the charging voltage should be. But, you should only be able to measure t...

so I tested voltage. Right now battery is 38 +/- volts. I plugged in the charger which shows a SOLID GREEN LIGHT and tested voltage with it hooked u...

@joel-brodeur we're crossing posts again. You beat me this time...

@95g-atl So, at 10amps it will take around 10 hours to fully charge this battery. Do you have the manual that came with the charger? Here is an exc...

@95g-atl Is this the charger? EG4 Battery Charger | 36V 30A - Signature Solar It indicates 30A? And it looks like you don't trust the light on th...

The battery charger is the EG4 36v 10 amp. funny thing i noticed is the battery charger light is always GREEN. Even when it is not even hooked up t...