It is currently on firmware faab-1112.

FPO (for placement only) so that i could get measurements for raceway and figure out security. More to follow. I intentionally tilted the intern...

12000XP is in Standby state 🙁 Turn off EPS, turn off inverter Turn on the generator. Optional that I do or my lines would freeze Turn on...

@signaturesolarjess Is there a TSB for performing a calibration - resetting SOC - for the different type of EG4 batteries? I would love to get mine...

@ron I don't know what battery cells you have but the manufacturer of my cells, EVE, state that the min low voltage is 40V(2.50V each) on the pack of ...

According to EG4, once you go to 1E1E, you cannot go back. This is due to an updated memory mapping.

finally got an official update cable on the way. i'll measure output volts and mark/space states and post back here for anyone else in future this de...

@tristan Not necessarily, the recalibration just resets the SOC for the BMS to recognize its high and low points.

12000XP is in Standby state 🙁 Turn off EPS, turn off inverter Turn on the generator. Optional that I do or my lines would freeze Turn on inve...

@signaturesolarjess Is there a need to "recalibrate" the battery if you're using voltages to manage SOC? i.e. Not using SOC%.

The "Lead Acid" mode is our user defined mode. This is not just for lead acid batteries, it's just the setting that allows you to manually set the par...

Thank you so much for the shoutout! I'll let Brooke know of your compliments! We don't take Amazon pay but we do accept Affirm!

I got it fixed. Here's how

@ron I see a 56.2 among the charging specs, but I'm not sure that's relevant for assessing SOC when not charging. My battery currently indicates 84% ...

I thought EG4 recommended 56.2