@papote EG4 protocol is currently the only supported option on the Chargeverter GC.

Do you have a scene created on the Solar Aircon app?

Currently, a manual adjustment is required to switch from Daylight Saving Time to Standard Time. This can be done by navigating to the Configuration t...

1. This would be possible with the paralleling kit installed on the Wallmount batteries.2. According to the Chargeverter manual, this setup is not rec...

According to the Chargeverter manual, this setup is not recommended. However, I have observed customers connecting the Chargeverter communications in ...

@jared Thinking about this, I can see how some folks would want to conserve fuel, and some would want to "top-off" batteries. When the developers lo...

Would you be able to post a screenshot of this error?

The Lifepower4 V2 must serve as the master battery due to the architecture of the BMS. This document will assist you in setting up communication betwe...

@jarrett , great, I'd appreciate that. What I am looking for is the ability to set inverter charge setpoints such that I get a proper CC/CV charge cur...

@joel-brodeur This is the expected behavior. However, I’ll forward this to our R&D team to explore potential improvements in the charging logic wh...

@pawnee I generally prefer using SOC for BMS communication with our batteries. I'd only switch to voltage to recalibrate SOC unless you find it perfor...

Let me pass that along to my director, and see if that is something we can do.

Thank you for sharing! Please don't hesitate to reach back out if you need any support in the future!