Thank you Mr. Baker, I will pass that information along to the R&D team, as well as the firmware engineers.

@treedor Wonder if it is a geographic issue. Everything is working at my location. App and website.

My thinking is that you can connect the Chargeverter to all batteries when connected in parallel via bus bar OR only one battery if they are run in pa...

@ron your questions are the same as mine. Hopefully jared will read and reply. I also need to know should I connect to primary battery with chargever...

@grissam-solar I used a bus bar since the Chargeverter comes with a ring terminal on one end and I didn't have the correct tools to put the amphenol c...

My system is One EG4 18k inverter with two All-weather pro outdoor wall mount Batteries. The system is hooked up to the grid also for charging the bat...

@joel-brodeur thanks. I’m going to contact Tec support and double check. I’ll make a post and see what EG4 says. I’d love to she a SOC vs Volts chart ...

@pawnee When I used FLA I too was told to never use SOC. However, with my old system I found that with proper bi-annual maintenance (re-torquing all ...

@jared A follow up on this. My generator ran today and seemed to have charged everything in the expected manner. However, the generator shutdown...

Had the same issue, I took my inverter to my provider (Current Connected ) they took care of it in few hours, they said when I tried to update the fil...

I found the cables that shipped with my batteries are rated right. I decided to over build it, I changed all the leads to 2 AWG. and the output of...