Now my batteries are 93% (Bat1) and 84% (Bat2) respectively and Bat2 is showing discharge. Flexboss is not charging the batteries anymore  

@jlankford , I have similar issue with 6000xp. The EPS standby power is draining my battery 20+ % overnight with no loads. PV next day does recharge...

Added note: Although located inside a garage, these are the outdoor all-weather battery units, model WP-16 280-1-AWLL

@eg4eric I am reluctant to share my serial number on a public platform. If you have a private channel, no problem. That said, I have been able to st...

I found a workaround after much testing of the various settings and their interactions. Here is my final config: Smart Load: Enable Start PV Power...

I assumed the same thing at first, but the operation makes sense - the inverter powers itself from DC (battery) all the time, so if there is an AC gri...

I noticed that the monitor app now has the ability to set the duration for a Quick Charge. Thank you. I suggested that addition about a year ago, an...

The only thing i notice thats different on the data logging is that the BATSTAT goes to 2 vs 3 when it goes into these ~10 minute periods of not worki...

Well, it happened today. battery charging stopped for 10 minutes almost exactly at 11am. This time it recovered by itself without any intervention. wh...

Woke up this morning and can no longer read params from either of my stations which means I cannot start quick charge. The error is read params failed...

And just like that I got back in and can view an set my parameters