@eric Probably a dumb question, but since inverters invert DC to AC, how is this inverter converting AC to DC when it is powered from the grid or gene...

@george-redinger When you spoke about having to enable "Battery Backup mode" when the grid went down, are you talking about the settings on A or B of ...

@jared nevermind it only took 3 minutes and it already reset back to daylight savings YES.

@jared here you go, both are set and the same. in an hour when the daylight savings turns its self back to YES from NO i'll screenshot it again.

@eric There is enough production to power both the load and the batteries. I've noticed the Enphase app is always exporting about 10% (see image) of ...

@ron I'm sorry, could you provide more detail on what you're referring to?

@jared I will absolutely check that as soon as I have time to log in but I'm not sure it will be helpful as the problem is not the time the problem is...

Also, just to add. Apparently if I set "Grid Sell Back" to disable, the connection to my enphase combiner gets lost and I start to import from the gri...

Is your system producing enough solar to power loads and charge batteries?For the Battery Priority Start Time 1, try setting to 00:01. If this still d...

@chris07x Yes, The reply from @eric (below) (I am replying before his reply) is a good answer. But it does not help my understanding. Here's ...

You can use the app or the monitoring website (Maintenance Tab) to update your inverter to the most recent firmware. Version 20 of the LCD firmware is...

@eric Hi Eric, thanks for the reply. These are my current settings. See attached image. Any suggestions to prioritize battery charge would be greatl...

Is it showing any warning or Fault codes on the screen or is the screen staying the same as the screenshot then just turns off?

@chris07x The Power Backup feature controls the seamless transition of the inverter to battery power when the grid fails or is interrupted. Enab...

We are still conducting internal testing. Version 0405 remains the current standard release.