@eagleridge I'm glad you figured it out! I will definitely pass the feedback along to our documentation team. Thank you!

@frugal-farmer Here is the link to the Spec sheet for this inverter.EG4-6000XP-Inverter-Spec-Sheet.pdf

Are you sharing all 12 batteries with both inverters? Or does each inverter have its own battery bank?

Which battery are you using?Does your battery have Luxpower Protocol?

@ray Where did you see or hear about the Self-Balancing via BMS? I just want to make sure we clarify any confusion.

@ianscott that's a direct connect to the batteries and then you have to make sure the inverter and chargeverter play nice together while solar and gen...

@michaelahess Once you change the inverter to Lead acid, the SOC parameters will not matter since it's going based off of voltage. So, you will need t...

@ianscott That is the best solution!

Do I keep the SOC settings for charging and discharging, just up the absorb to 57?

I've been trying to keep it from 100 to 20, but it regularly goes to 8-10, even though I have the inverter cutoff set to 20%. It may need a calibratio...

I reached out to the retailer in early September, and they have been unable to provide a replacement unit as they are on "backorder". Is it possible ...

To recalibrate the battery, you’ll need to charge it to 57V using either a 48V charger or the inverter set to Lead Acid mode.Are you regularly chargin...

Yes, the 2 wore Start/Stop will work when Micro-Grid is enabled.