I recommend verifying that the device address is set to 0 and the battery dip switches are configured to ID 0 before updating the battery. Also, here ...

Could you share a few pictures showing how the batteries are connected, the dip switch settings, and confirmation that the V1 is not communicating?

I will see if I can find the fan dB rating for the 3000EHV. However, here is the fan control logic for the 6000XP and 18kPV:6000XP Fan Control Logic: ...

Could you post a picture of the paralleling cables and dip switch configurations for both the GridBOSS and FlexBOSS?

Setting 43 would be the correct setting to initiate charging with the 3000EHV. However, as mentioned, the maximum initiation threshold is 50%.

Would you be able to DM me the serial number for the Wi-Fi dongle? I can take a look at this as well.

I will be getting more information on this as I have not seen Z02T03 on production models. However, the current display of V2.01 vs V2.03 on the monit...

I currently do not have an answer there. However, would you be able to provide me with the BMS and LCD version found under settings < Version for b...

Would you be able to DM the Wi-Fi dongle serial numbers?

The correct file was applied. Z02T17 is not the appropriate naming scheme for the Indoor Wallmount and refers to the All Weather Wallmount firmware ve...

Feel free to send me a DM and I can help get this corrected.

The account has been disabled, and the post have been removed.

@brdfrd you would only need to charge the battery bank in lead-acid mode once, until it triggers the battery overprotection warning once one cell hits...