@eric So this would be using Force Discharge instead of Peak Shaving?

I might have it. I had a mode DIABLED but had left the time set from 00:00 to 22:00. When I set both too 00:00 self consumption started.

The parallel setting was an issue, I had found the 'sync inverter' button that fixed the displays. I assumed it only applied with multiple inverters b...

It appears the system is already set up in parallel.Also, make sure that the battery backup mode isn’t conflicting with any discharge settings.

Also, make sure that none of your charging parameters conflict with your discharging parameters.

Have you tried setting up the Force Discharge and still having Battery Backup Enabled?This should force the batteries to discharge at a certain time o...

Were you able to register an account through the app or website? Were you able to connect the dongle to your account?What inverter do you have?

Off-Grid UPS - Powered by EG4 Cabinet w/ 3 EG4 LL 25.6v 200Ah BatteriesI have been running my system continuously for 3~4 months on solar & batter...

Eric, displays are looking better, I still do not see self-consumption mode. I must have a setting that is contradicting something. Here is my charge/...

Thanks Eric, I see both displays the same now. I do not have the 'action' the same as your image - does that matter? Where would I change that if it d...

Make sure you have them in parallel, this will allow to show both as one. Also, make sure that the GridBoss setting is enabled through the FlexBoss21 ...

Could you please share screenshots of your settings, or provide your station name or serial number? I can review your setup and help identify why this...