I updated the 3 eg4 LL S to the mulitpack firmware version went from Z02T18 (factory version) to Z02T12i changed each of the battery to use the P06-Lu...

@eric I don't know what @pawnee is running but I have a 6000XP with a 14KW Kohler (14RCA). I am not certain what the actual logic in the inverter do...

For the LCD update you will need a Flash drive. You will need to have access to a computer and download the firmware and transfer it to the Flash driv...

I apologize for the delayed response! Are you still having issues with the inverter and generator?What generator are you using?

@pawnee Not certain if it is the same issue but it appears that some similar things have happened to other user: What I get from the post is that th...

@joel-brodeur yes sir that’s the one I updated too

@pawnee Have you looked at this thread? Supposedly the LCD update is included in the zip package: JB

@jlankford no I didn’t. I haven’t been able to locate it

I'm have 2 EG4 batteries connected to my 6000xp and just want the grid to keep them charged up over the winter. I've got it hooked up and have the dev...

@pawnee Did you update the LCD version too? If not, I think that's the cause of the watts display problem.

I tested the app and proved it to myself that yes it does work just fine. SWEET! {emojis}:star-struck:

@joel-brodeur I know I can’t win for loosing. I’ll make the 18k call for the generator tomorrow and see if it kills it when battery voltage is reached...

Yay that the app update worked for getting the firmware update loaded. But weird about the Watts. 😱