@eg4newbie your 12000xp still isn’t changing the battery BMS from the 200 amp discharge setting is it? On battery only and balanced lines you can ...

Also, is the area that shows the time span supposed to be showing a On/Off graft or something for that function? Seems to be blank but I don't know wh...

Additional issue with AC Charge Mode, AC Charge Enable is that when it's enabled, no power will be supplied by the battery and it only gets supplied b...

I'm also having a similar issue with Working Mode Setting, AC Charge Mode (AC Charge Enable) being inadvertently ENABLED. My system consists of an 18k...

Looks like you have enough solar but you cant use it all with your loads at the time that your solar is producing. Your battery gets charged up and ca...

Your EG4 24k is efficient, but constant HVAC draw transforms the system into a daily deep-cycle challenge—especially in winter. You’re seeing exactly ...

Unless of course that I'm wrong and this inverter isn't intended to provide continuous power and thus should only be used in "Emergencies" or as a "Ba...

Well in the time waiting for moderation as a new user, I updated the firmware from ceaa-000202 to ceaa-0405. Not sure this was the solution, but I've...

@slackware1995 Hey, really appreciate you taking the time to break all that down—it helped a ton. You were spot-on about the grounding. I’ve actual...

I am using an 18kpv inverter as an off grid system. PV array of 4 strings of 8 panels and 6 eg4 batteries in rack mount. I am set up to use a 12.5 kw...

@dfwtinker I agree but the number of kWh they are predicting has to be estimated by a guess of what size our arrays are. I would think they could l...

@eg4eric Thanks for the info and that's fine, I've got lots of options.