@weertske I'm just running PPG on an rPi with it setup to send MQTT messages to a Mosquito MQTT server and then I have Home Assistant pulling the MQTT...

@dougl I just found this thread and I am hoping you can bring me part way up to speed on using PPG. I also have an 18kPV. How are you connecting t...

@eg4eric If i make one of the LL-S units the cluster master and put the 2T18 firmware on it, can that version still communicate with the 2T12 firmw...

That sounds like an internal issue. I recommend reaching out to your distributor.

Good afternoon, You're right, the sticker is a little confusing. The inverter allows 8kW output, but it can take in 12kW of solar. This unit is consid...

@spencerowen Glad you were able to get it fixed and thank you for bringing it to my attention! I'll let our team know about the time to hold the butto...

Unfortunately, that isn’t possible, as the Mini Split is designed to operate only on solar or AC power. To use the batteries, you will need to use the...

@customertobe natural gas is probably the best source for gen fuel, but I would still conserve fuel just in case it’s a wide spread long term grid fai...

Got it fixed. The 1.6.3 iOS app update fixed it. Now the server points to instead of 47.254.33.206 and the dongle connects successfully ...

Got it fixed. The 1.6.3 iOS app update fixed it. Now the server points to instead of 47.254.33.206 and the dongle connects successfully

@rcg123 I am running 2525. Yes, there does not seem to be the ability downgrade ( revert to a previous firmware version)

I apologize for the delayed response. Based on the pictures provided, it appears the first battery is an LL-V2 model with four DIP switches. Unfortuna...

@pawnee My generator is natural gas, at least one thing that is not an issue for me. 😀 Thanks for the feedback.