I, also, can confirm that I have lost functionality. I can't read or update settings via the website and have already rebooted the dongle on...

@jxnhrprI can’t recommend anything other than solar panels, as the MPPT inputs were specifically designed for that purpose.

@mtjagDo you have the 2 wire Start/Stop installed?I'm just trying to gather all the information.

If the batteries get bricked, most likely the wrong firmware was installed. There is a small issue with the data not showing properly, but it will not...

@britton-beckham @eg4eri, I just got the EG418Kpv and have the same request. This is the third day of having the EG4 and I still don't know if my gen...

  @eg4eric A couple of lights (LED, maybe 25 w), the furnace (2,000 w), the clothes dryer (5,500 w), and at the most our refrigerator and sm...

I understand, but I currently don't have a long enough LAN cable, so I would like to set to lead- acid in the meantime with no communication.

@eg4eric I had the Gen start set at 50.2v, so the generator failed to activate and start. Still trying to find out if the EG4 will start the generato...

I do not see anything both on the web as well as the app.. it was working fine few days ago.. here is the screen shot...

@rick151You can try setting the inverter to Battery Type: Lithium and Lithium Type: 2 (Pylon Protocol)

@sgazulaCan you share a screenshot of what you see?Are you using a computer?Everything is working normal and there should be no issues.

@eg4eric Could that PV input be some type of benchtop power supply, rather than solar modules that I don't have at home.

@jxnhrpr As long as the inverter has at least one power source, the firmware will install. However, if PV is not connected to the inverter, the MPPT p...