@jared So utilizing the RS485 communication for the Chargeverter gives a false reading? Even after changing to EG4?

@joel-brodeur That document is correct.

@jared Is that the correct document for updating? Thanks, JB

@joel-brodeur the RS232 cable would definitely be needed. The Indoor does not currently have a firmware update for the RS485.

@jared For reference this is the documentation we were using to perform the firmware update. Thanks, JB

@jared It is the indoor battery

Is this the Indoor or the Allweather battery? Also, both the RS485 and the RS232 cable would be needed for a firmware update.

From your description, the inverter is throwing an internal communication fault. Feel free to send me a DM of the serial number for the inverter and I...

Thanks Jared. Well, that is what I did. I assume this will eventually be implemented, otherwise there is no reason to even ask if DST should be en...

@papote EG4 protocol is currently the only supported option on the Chargeverter GC.

Do you have a scene created on the Solar Aircon app?

Currently, a manual adjustment is required to switch from Daylight Saving Time to Standard Time. This can be done by navigating to the Configuration t...

1. This would be possible with the paralleling kit installed on the Wallmount batteries.2. According to the Chargeverter manual, this setup is not rec...