Try cold restart of entire system including battery BMS (power down all components for several minutes while in lead acid mode) then power up starting...

one important consideration is that all the input on each MPPT should be at or nearly at the same string voltage.   for example, you would no...

In order for the Smart load to be active, the inverter will need to detect the 1kW of PV and also the battery voltage will need to be under the Smart ...

@eg4eric OK I see the option but the experience and the actual steps are different.   I'll look closer later.   Thank you

hello Eric! I have maximized the window, but the prompt is still visible. What else can I try?

@sunnysideThat is correct! You will use a 3/8 bit!

@captjwhIf you share your inverter's serial number, I can help you get all this set up and make sure the settings are correct.

@sunnysideYes, that is correct. It also depends on how much voltage and amperage your strings are. However, if you decide to add another string later,...

STILL no fix...... and STILL no acknowledgement from Engineering that they are even working on it! This is pretty terrible. I hesitate to sell/ins...

Are you referring to using A 120V generator to charge batteries?The 12000XP requires a 240V generator to be connected to the inverter.

@fletch1229 What inverter do you have?Can you please share your inverter's serial number so we can look at what could be causing this issue. We might ...

@ray74 Yes, I was referring to a balancer for the battery cells, but you are correct, Lead acid batteries do not need that. Are you able to share a vi...