I tried editing my post to include my inverter settings... didn't go well... so here they are01 - Utility02 - 60A03 - Generator04 - Saving mode disabl...

About 11500-12000 watts of useable battery which is still 20 hours

@signaturesolarsupport ill call in later today. I’ve walked through the problem a couple times with you guys but no luck. Looks like others are hav...

@joel-brodeur I keep seeing 60W as typical idle/standby consumption for the 3000EHV. @in-offgrid-greenhouse You need to understand a behavior ca...

After looking at the spec a little more, I think the self-consumption of the inverter (while active) might be higher than the 15-70 mentioned before. ...

Don't forget loss do to idle consumption (15W-70W 15 is standby so you are looking at closer to 70) and loss due to efficiency - (94% efficient batter...

I got the answer on another forum. Top line goes to EG4 gen port, middle goes to solar output from Enphase combiner, and bottom goes to main service p...

What AWG are the wires you are using to connect the batteries to the bus bar?

Is there an answer to this though? Also, should we be using lugs to connect, or bare copper? If lugs, what is max/min sizing.

I can't add anything to the problem but if you post the firmware version you upgraded to, it might be helpful to others who search for others who've h...

24k Mini Split INSTALLATION DAY!!! 100% solar (actually running on 240v off of my battery which of course is charged by solar. In the daytime the p...

Certainly! The details you provide to our tech will help us find the right solution for you! 🙂

@signaturesolarsupport It would be great to hear something on this as it is also an issue with the 6000xp. It is almost like when the gen gets the shu...