@timmann sorry, I forgot that #2 was Pylon specific and that is the one you want since Basengreen doesn't add anything extra to their Pylon protocol l...

@dougl Good to know on the Lux option. I had circled it to try at some point but I got to the option 2 first in the list and it worked well enough. I ...

@timmann I have v2 of the Basengreen DIY battery too. FYI, the cells are 314Ah so you calculate total capacity/storage by multiplying by 51.2V so we ...

Hey @dougl I found this useful, thank you. So I have the newer Basen Green V2 battery boxes with 315Ah cells and I used the battery communication ca...

Happened to me today. I have a pair of units with 10kw pv divided between the 2, 25kwh of LL batteries. All units are on most current firmware that I...

It's only a 3 ton HVAC condenser but I've read that there can be high harmonics when HVAC condensers, heat pumps or well pumps kick on.Does anyone hav...

Did you ever find anything?

Hello @lance, I too had a "long way from the wifi" situation. I was able to resolve my problem using a wifi extender and a poe++ extender. Betwee...

Depending on your skill set there is an option which combines 2 open source projects. To get data from your EG4 inverter( 18kPV and 6000 supported ) t...

@eg4eric says it supports can and rs485 ? I'm also interested in these./p> maybe the battery code needs to be configured on the eg4? or its n...

Yes, they work, but note the details of my two posts on the topic. I think there is some valuable info in them that could be included to clarify the d...