@eg4newbie just a quick note. Bypass limit is 100 amps ac, but the inverter can only produce 50 amps ac before overload is reached, even less if ba...

Here's an idea which might help make the prediction data useful, add Yesterday's actual data curve. We see "Today Solar Energy" prediction getting up...

@montufar I had a similar situation with my 24K. The solution I finally settled on was to run the 24k directly from the my 6000xp; it has no probl...

@we2 Thanks for the patient helpful reply. I keep forgetting when writing that the load limit is really 6Kw per leg and I think I understand what you...

I have a similar question. I have 4 EG4 Lifepower , 24v 200ah batteries I bought from you guys with the intention of putting together a battery rack w...

@eg4newbie One clue for me is that the bypass power from grid was 6329 watts. This would cause an overload warning if that load was on one line, and...

@montufar Currently, there is no firmware update available for this issue. However, I will escalate the matter to our development team for further rev...

At this time, end user accounts do not have the ability to update the battery remotely. Since there is currently no firmware update available for the ...

The BMS manages the charging and discharging of the battery; However, you must set the inverter to stop discharging the battery at a specific voltage ...

@eg4eric Thanks so much. Really appreciate it!

Which Inverter are you using?

@chaseI understand your concern, and I’ll be sure to mention this to our team for them to consider.