@eric perhaps I was not sufficiently clear. Let me try to be a little more verbose: * GridBOSS has inputs and outputs. * Inputs are: grid, inv...

@eg4c Are you connected to the grid?Providing an explanation for these numbers is challenging due to the lack of sufficient data or information.

Yes, as of now it is only through windows that you can update the firmware for the battery. You should be able to log in on another device with the sa...

@eric - one eg4 allweather battery; 1 smart port. With that said, the data is from GridBOSS, it has no batteries hooked up to it.

Tariffs cause short-term pain, but long-term effects are uncertain still.

@Eric Yes, backup loads breaker is/was on. I'm not sure if you saw my most recent post. Power is being supplied to the backup loads on both grid and...

@eric Here is a pic of what my battery currently indicates for firmware/LCD version Do I need to update both the firmware and the LCD? If so, cou...

There are 2 firmware updates for the indoor WallMount batteries. RS485=Z02T04 and RS232=S02T11. You will need both RS485 and RS232 cables for these up...

I don't know much about this battery, but what do you have the charge current set to on the inverter?Do you have the inverter on lead acid mode?

Can you please provide more information about your system?How many batteries?Are you using any smart ports or AC couple?

I'm glad you aren't having anymore issues! If you encounter any other issues, feel free to reach out to me!

@fizziocrat Just want to confirm, did you have the backup loads breaker on?@eabowdenDo you have power backup enabled on the inverter settings and also...