@dtbaker61 The screenshot on the left is with Lead Acid selected as battery type and the one on the right was with Lithium selected as battery type. ...

Since setting my batteries back to Lead Acid, the last three days show my system reaches 56.4v for 4-8minutes then drops back lower eventually getting...

@dtbaker61 I definitely don't want 3 or 4 hours at that voltage to be sure. I've spoken with the SimpliPHI tech over the past 4 years with these batt...

@ouijifour thank you for sharing. I'll start reading to try to figure it out. Strangely, today after switching my settings back to FLA lead acid, my...

@dtbaker61 you seem to have some insight regarding the lack of Absorb time the EG4 inverters are lacking. With that in mind, I have an EG4 18Kpv that...

After a month of trying to get an accurate answer from EG4, it appears the accurate answer is that the EG4 18Kpv does not support being able to set an...

@eg4eric I'm using voltage...no comms. I've got the generator figured out now, thanks.

@eg4eric, since I am completely off-grid, I really need to find out if the generator will run based on voltage set points for the generator. Do I do...

@eg4eric a couple of other things to add regarding the generator. My installer was able to do the "Start GEN Exercise" using the button on the app ye...

@eg4eric yes and it was tested by combining the two wires and it worked.

@britton-beckham @eg4eri, I just got the EG418Kpv and have the same request. This is the third day of having the EG4 and I still don't know if my gen...

@eg4eric I had the Gen start set at 50.2v, so the generator failed to activate and start. Still trying to find out if the EG4 will start the generato...

@eg4eric the Off-grid cutoff voltage is set to 50.1v