While my 6000xp firmware updated correctly (ccaa-001212), my mppt firmware is showing a Failure status. I tried locally as well as Remote Update on th...

Good to hear you back on. I guess There is some thing with EG4 equipment firmware updates.... I recently did my Wall mount battery BMS firmware upda...

I did the update at least 5 times since last night after the inverter shut down and it just came back on… 15hours later. Anybody had the same issue??

Anybody else is having issues with the latest XP6000 update? Or any other fix to solve the issue? I am off grid and running a generator on my internet...

Thanks for the suggestion Krzysiek, unfortunately, i just tried and it still says error 0.

I tried to delete the above post. But everything is working now!

  Sort of, I realized it was not respecting the charge settings to 57.0 volts because BMS would disable charging at 56. This stopped chargi...

I had the same issue with the last upgrade. It did not coplete resulting in Error 00 - internal comms error. Make sure you run the inverter on batte...

Fixed! Using the correct battery type resolved the issue I was having above with the charging not kicking on! Thanks for your patience with me. I n...

Edit: just now saw Eric's helpful comment about my incorrect lithium type. That could have a lot to do with the issues I had below.. Will try that fir...

Thanks! I will charge everything to 57 volts somehow. I think if I set the batteries to lead acid and set max voltage to 57 and do a quick charge? Nor...

Well… I just did this update on the XP6000 and now i have error 0 and no power !!! HELP!!!  

@eg4eric Excellent!! Thank you very much for getting this!! All 48 batteries have been updated and I verified along the way that they were updati...

@powerup Yes, it does require interconnection with the home smoke alarms. That's the reason for my concern that a nuisance smoke alarm inside the hous...