@frugal-farmer Really hard to do. wires go from grid circuit breaker to Reliance Controls Emergency Power Transfer Switch Kit Model 30216BRK. From t...

@myself, The missed setting was Charge Last (?). Setting Charge Last(?) to disabled now routes PV in excess of loads to the battery, Hopefully, wh...

Yes that is correct.

@eg4eric thanks! This page is not what is in the 12000xp manual.... what document did this come from ? I will certainly give this a try as it make be ...

@eg4eric "Power Backup" Not always "Power Backup" disabled. Currently I interpret "Power Backup" to mean supply loads from the grid till the g...

I apologize for the confusion. You are correct. The inverter DIP switches should be in the up position, and the GridBoss DIP switches should be in the...

@spencerowenCan you send me a screenshot of your dongle parameters please?

Do you know what firmware the GridBoss is running on?

1. 2. There isn't really a sample, but the inverter does come with default settings. It comes in Self-consumption which is mostly what people use...

The best way would be to connect both batteries with the paralleling cables and connect the Master battery to the inverter as shown in the image below...

@david-luke hi, unfortunately, the issue was never resolved and i also had other issues like the inverter telling me that i had no voltage on from my ...

@david-luke Do you have a 6000XP with the same warning 25 and 27?

I've communicated with Kierstyn at SS this morning. Currently online. Power backup - enabled. Solar-on, grid-on. Disconnected batteries to ohm test. F...

@rcg123 Do you have the inverter online?What batteries are you using for your system?

@george-redingerHave you always had Power Backup disabled?