In my experience when Wall Mount battery is set to lithium (closed loop) the battery voltage settings do not work - only SOC triggers charging: "Batte...

@dougl For you it would be something you'd probably just have to code as it's not one of the data points for what you're using. You can also just rem...

@lemming regarding getting the Update Time data from Python Protocol Gateway, I didn't find it in the spec( EG4-18KPV-12LV-Modbus-Protocol ) for thing...

Which batteries are you using?Also, do you know the voltage of the battery?

I too was looking for dimensions to install blocking for my wall mount 280Ah and 18kPV's. I emailed the support desk and they stated they have no docu...

You are correct. For AC charging, multiply the amperage you’ve set by the battery’s voltage. This will give you the number of watts your batteries wil...

@lemming I've been using Python protocol Gateway(PPG) to talk to my EG4 18kPV and since it exports MQTT I'm pulling in the data to Home Assistant from...

I was playing with the "Lux power-distribution card Card" and it has a field for "Last updated" and was curious if that information could be scraped w...

In January I designed and installed the solar array on my south facing patio roof do maximize the output. I did not think of throughout the day shad...

@eg4eric Everything is working, (since i updated the software to make the overloads stop). Waiting to hear if the new update fixed the DST issue (I li...

@eg4eric PM sent